No products in the cart.
SuperPure
Super Pure
Availability:
In Stock
The Supertek Super Pure is a compact ultrapure water system designed for critical applications in analytical and life sciences laboratories. It delivers consistent Type I water quality with easy-to-use features, advanced safety mechanisms, and flexible installation options.
Features:
- Super Fill digital dispenser for precise volume control
- Integrated real-time TOC monitoring
- Built-in leakage sensor for safety
- Ready-to-use with pre-connected filter set
- Below-table or tabletop installation options
- Volumetric dispensing steps for consistent outputs
- Integrated pressure reducer for stable and efficient operation
- Economical and easy filter replacement system
Applications: AAS, IC, ICP, buffers and media preparation Ultra-trace LCMSMS ICP-MS, HPLC, TOC-analysis Life science and microbiology, cell culture media
Note: For the Accessories & Consumables Please Contact the Sales Representatives.
SP
| Cat. No. | System Name | Quantity | |
|---|---|---|---|
| SP-T1-01 | SuperPure UV | ||
| SP-T1-02T | SuperPure UV/TOC Touch |
| Technical Specifications: SuperPure UV/ SuperPure UV-TOC | |
|---|---|
| Type I Water | |
| Conductivity (µS/cm) | 0.055 |
| Resistivity (MΩ·cm) | 18.2 |
| TOC *(ppb) | ≤ 5 |
| Real-time TOC Monitor | Available with TOC model |
| Dispensing Rate (L/min) | Up to 2 |
| Endotoxins / Pyrogens (EU/ml) | < 0.001** |
| Particles ≥ 0.2 µm | No particles ≥ 0.2µm |
| Bacterial Content (CFU/ml) | < 0.01 |
| RNase (ng/mL) | < 1 |
| DNase (pg/mL) | < 5** |
| Proteases (µg/mL) | < 0.15** |
| *Dependent on feedwater quality **With POU biofilter | |
| General Technical Data | |
| Operating Pressure (bar) | 0.5 – 6 |
| Supply Voltage (V/Hz) | 90 – 240 / 50–60 |
| Power Consumption (kW) | 0.1 |
| Water Connections | 8 mm |
| Ambient Temperature (°C) | 2 – 35 |
| Dimensions Unit (W × H × D mm) | 390 × 720 × 615 |
| Dimensions Production Unit (W × H × D mm) | 390 × 480 × 380 |
| Feedwater Requirements | |
| Water purified through RO, Ion Exchange, Electro deionization, or Distillation | |
| Conductivity (µS/cm) | < 100 |
| TOC (ppb) | < 100 |
| Silt Density / Fouling Index (SDI or FI) | < 1 |
| Temperature (°C) | 2 – 35 |